These are the default settings in the Davinci Pro XYZ Software:

Printer Profile:
Printer: da Vinci 1.0 Pro
Cartridge 1: PLA

Temperature:
Nozzle 1: 190C
Heated Bed: 45C

Layer:
Layer Height 0.3

Shell Thickness:
Normal: 2 Layers
Top Surface: 3 Layers
Bottom Surface: 3 Layers

Infill:
Density: 10%
Infill Type: Rectilinear

Speed - Shells:
Normal: 30 mm/s
Surface: 30 mm/s
Small Radius: 30 mm/s

Speed - Infill:
Normal: 30 mm/s
Top Surface: 30 mm/s
Solid Infill: 30 mm/s

Speed - Other:
Bridging: 20 mm/s
Non-printing: 100 mm/s
Bottom Layer: 20 mm/s
Retract: 30 mm/s
Small Parts Adjustment: Off

Supports: Off

Retraction:
Length: 4 mm
Active Threshold: 2 mm
Nozzle Lifting for Retraction: 0 mm
Add extra filament after: 0 mm
Retract at begining of each layer: yes
Disable retraction within perimeter: yes

Extrusion Ratio:
Shell: 100%
Infill: 100%

These are the 'hidden' settings:

; filamentid = XX,XX,

This setting reflects the filament type selected in the Filament drop down.

Other: XX=20
ABS: XX=41
PETG: XX=47
PLA: XX=50
Tough PLA: XX=54

This comment has no effect on the printed item