Install Cura AppImage
Configure Printer as Custom FFF

X,Y,Z Sizes: 200mm
Origin At Center: Off
Heated Bed: On
Heated Build Volume: ??
G-Code Flavor: Marlin
Compatible Material Diameter: 1.75mm

There's something in the start GCode, I think which enables the printing menu ...

Start G-Code:
; Variables
G21 ; set units to millimeters
M108 ; Check Temperatures
M107 ; Fan Off
M104 S{material_print_temperature_layer_0} ; set temperature
M140 S{material_bed_temperature_layer_0} ; set bed temperature
M109 S{material_print_temperature_layer_0} ; wait for temperature to be reached
M190 S{material_bed_temperature_layer_0} ; wait for bed temperature to be reached
M191
G90 ; use absolute coordinates
G92 E0
M82 ; use absolute distances for extrusion
G28 X0 Y0 ; home X and Y axes
; Extrude 3mm into free air
G1 F500 E3
G92 E0
; Wipe
G1 F2400.000 E-2.00000
G92 E0
G1 Z0.350 F2700.000 ;
G1 X3.000 Y81.000
G1 F2400.000 E2.00000
G1 X5.000 Y81.000 F600.000 E2.46245
G1 X5.000 Y181.000 E25.58519
G1 X3.000 Y181.000 E26.04765
G1 X3.000 Y81.238 E49.11527
G92 E0

End G-code:
M140 S0
M205 X20 Y20
M107
G92 E0
M103 ; turn off extruder and retraction
M104 S0 ; turn off extruder
M140 S0 ; turn off bed
M107 ; turn off fan
G1 X0 Y0 Z180 F1000 ; home X and Y axes and drop bed
G28 X0 Y0 ; home X and Y axes
M84 ; disable motors
M82 ;absolute extrusion mode
M104 S0
;End of Gcode


References:

https://www.thingiverse.com/groups/da-vinci/forums/general/topic:27713

Davinci GCodes

M107 - Turn off Fan
M108 - Turn off Auto Temperature, and also Enable screen
M104 - Set Bed Temperature (No Wait)